According to the crushing raw material selection, the crushing grain feeds are mainly selected, and the top-feeding hammer crusher can be selected. For crushing the bran-gluten wheat feeds, the claw crusher can be selected; if the universality is required, such as Mainly for crushed grains, taking into account the cakes and stalks, you can choose tangential feeding hammer mill; crush crushed shellfish and other mineral feeds, and can use shellless sieve crusher; if used as pre-mixed feed pre-treatment, requirements If the product is finely crushed and can be adjusted as needed, a special screenless mill should be used. According to the production capacity, general crushers are equipped with the rated capacity of the crusher. When selecting, the production capacity should be slightly greater than the actual need, otherwise the continuous production and supply of feed will be affected when the production capacity of the crusher is reduced due to hammer wear and air leakage from the air duct. According to the matching power, the power specification kilowatts of the supporting motor of the shredder is contained on the machine specification and on the nameplate. It often indicates a certain range. There are two reasons for this. First, there is a big difference in the power required when the raw materials are crushed. For example, the crushed sorghum is twice as powerful as the crushed corn. The second reason is that the load of the crusher has a great influence on the use of different screen holes. For example, when the 9FQ-60 crusher uses a sieve with 1.2 mm mesh, the motor capacity should be 40 kW; when using a sieve with a 2 mm mesh, a 30 kW motor can be used; for a 3 mm diameter sieve, 22 kW motor, otherwise it will cause waste. There are three ways to select the output of the crushing product through the discharge device according to the way of discharging material: self-weight blanking, negative pressure suction and mechanical transportation. Small stand-alone use more self-heavy materials to simplify the structure. Most of the medium-sized pulverizers have a negative pressure suction device, which has the advantage of being able to suck away the moisture of the finished product and facilitate the storage, improve the pulverization efficiency by 10% to 15%, and reduce the dust-generation degree of the pulverization chamber. According to the dust and noise, the dust and noise in feed processing mainly come from the crusher. The two environmental sanitation indicators should be fully considered when selecting a type. According to the energy-saving situation, currently, the quality of the domestic hammer mill has reached 70-75 kilograms per kilowatt-hour.
Thickening Agent
We are a professional Chinese manufacturer of Thickening Agent Powder; we supply various products of Thickening Agent Powder, such as Chitosan Powder, Konjac Glucomannan, Xanthan Gum, Arabic Gum, Guar Gum, and can providing product images and basic parameters with each Thickening Material. We have the perfect after-sales service and technical support. Please do not hesitate to contact us, Look forward to your cooperation!
Chitosan Powder,Konjac Glucomannan,Xanthan Gum,Arabic Gum,Guar Gum
Xi'an Quanao Biotech Co., Ltd. , https://www.quanaobio.com