No-till seeder maintenance and maintenance
First, the maintenance of the gearbox of no-tillage seeder The first replacement of gearbox oil was performed after the first 30 hours of operation and then replaced every 1500 hours. When replacing the lubricant for the first time, remove the screw plug of the bottom oil drain hole and the screw plug of the top air hole, drain the oil completely, and then screw the screw plug back and inject oil into the box. The no-tillage seeder belongs to the Farmland protective machinery, which combines smashing, rotary tilling, sowing, covering and repression into one, and can complete 6 kinds of operations at a time. Using no-till seeders for mechanized conservation tillage can reduce operational procedures and reduce agricultural costs. Moreover, it has obvious water-saving and drought-resistance effects, and implementing no-tillage sowing has greatly reduced the time from receiving agricultural sowing, and can greatly increase production and increase income. Second, no-tillage seeder lubrication Lubrication of the moving parts of the seeder is essential, it allows the machine to reach maximum durability and is also the most economical maintenance. After running the no-tillage seeder for a period of time, it is necessary to inject the lubricating oil to each operation site as required. After each 10 hours of operation of the seeder, the chain transmission parts and the operating parts of the traction frame are to be filled with lubricating oil. After 30 hours of operation, the traction frame lever is filled with lubricating oil. After 60 hours of operation, lubricate the transmission parts. After 200 hours of operation, the operating part of the coulter disc was filled with lubricating oil. Third, no-tillage seeder maintenance After the operation is completed, the residue in the seed box should be removed and the equipment must be wiped to remove dirt and oil. After sowing a kind of crop, we must carefully clean the seed box so as to avoid seed mixing and failure. After the fertilizer box is used, it must be cleared in time to prevent the machine from being rusted; lubrication oil should be added to the parts that need to be lubricated. After each operation is completed, the soil on the disc, opener, and repulsion wheel must be promptly removed to check whether the seed metering device, the fertilizer applicator, and the transmission components are flexible, and whether the screw nut is loose.
Introduction
Features
Performance
Physics speciality
Accessories
Software function Ambulatory Blood Pressure Monitor,Ambulatory Blood Pressure Meter,Ambulatory Blood Pressure Monitoring,24 Hour Blood Pressure Monitor Changchun Yingwang Times Digital Co., Ltd. , https://www.ccsdsm.com
FT-C08 is a handhold Ambulatory Blood Pressure Monitor which is designed according to oscillography principle and could 24 hours ambulatory monitor NIBP.It supplies the exact estimation warrant, and applies to clinique, the hospital wards or family daily health care.
Compact and portable,friendly interface, easy to use
24 hours ambulatory NIBP measure function,at best 358 pieces of ambulatory NIBP measure data can be recorded once.
Automatic measure and manual measure of the perfect combination,at best 99 pieces of NIBP measure data can be recorded once by manual measure.
High-definition color TFT display, strong visibility
The device can display low power prompt information, alarm information, error information and time information richly
Communicate with PC,PC software can achieve data review, analysis measure results,seeing trend graph, printing reports and other functions
NIBP
Measure Method: Oscillometry
Measure Mode: The upper arm measure
Automatic Measure Interval: 15.30.60.120,240 minutes
Measure range: 0kPa(0mmHg)~37.57kPa(280mmHg)
Accuracy: ±3mmHg
Pulse Rate
Measure range:40bpm~240bpm
Resolution:1bpm
Alarm parameter: SYS / MAP / DIA
Power: DC 3V(Two "AA",1.5V Alkali Battery)
Product safety type:Type BF applied part (Internally powered,defibrillation-proof)
Dimension: 106mm*75mm*31 mm (No including Packing)
Weight: <137g (Including Batteries)
Cuff for adult
Disk (PC software)
User manual
USB data line
Pack
PC software is connect to the device by USB interface
Can download NIBP measure result of the terminal device
Can display scoop-shape trend graph,filling-type trend graph, histogram, pie chart, correlation line graph.
Can edit every piece of NIBP data, and add annotation to it.
Can edit basic information,doctor's advice information, NIBP status instruction, current medicine-taken information, etc.
Support print preview,print the report.