Technical description of the technical characteristics of the fish tofu cutting machine
SMART Digital Bluetooth Hearing Aids SMART Digital Bluetooth Hearing Aids Shenzhen Sunshine Technology Co.,Ltd , https://www.yatwinsz.com
The fish tofu cutting machine should be operated by professionals and be familiar with the basic skills of the machine. Before starting the machine, you must check whether the cutter head is tightly locked, whether there is any foreign matter in the pot and the meat, and do not bring it into the pot. The amount of mash should be less than 80% of the pot capacity each time. When working, first start the stirring speed button, and then slowly load, the discharge process should also be in the slow process.
The fish tofu cutting machine should keep the lid closed when it is processed normally. Do not put your hand into the pot and touch the blade under the lid. The use of the fish tofu dicing machine will be slowly controlled from low speed to high speed, and the pan and speed will be adjusted as needed. At the end of the work, the “turning pot†will be stopped first, and the “turning knife†will be stopped step by step according to the principle of “first opening the knife, then opening the pot, stopping the pot first, then stopping the knifeâ€. After the work is finished every day, the fish tofu cutting machine should clean the machine in time to prevent the raw materials from entering the bearing and other gaps after curing for a long time, which affects the use. When cleaning, be careful not to rinse the table directly with water, and wipe it with a damp cloth.
Fish tofu dicing machine æ–© æ–© zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu zu life. If you find that the sound is abnormal during the work, you should immediately stop the inspection.
Fish tofu cutting machine features:
1. Finishing and automatic dicing is completed;
2, a wide range of adaptation, can complete the cutting of a variety of rectangular food, length, width, thickness can be easily adjusted;
3. Adopt PLC as the main controller to automatically control the cutting action. The cylinder work is the automatic component of the transverse cutter, with high automation and reliability.
4. The cutting machine output is high and stable;
5, the cutting machine dicing rules, sharp edges and corners, no slag, beautiful appearance;
6, the use of food-grade conveyor belt; alloy aluminum profiles for the frame, the appearance is beautiful and durable, in line with food QS requirements.