What are the cleaning methods for the filter cartridge? Introduction to the cleaning method of the dust filter cartridge
After the filter cartridge has been used for a long time, it will be covered with some dust. If it is not cleaned, it will affect the filtration effect in the next operation. How to clean the dust?
The automatic cleaning method commonly used in the filter cartridge is high-pressure gas pulse back-blowing and mechanical vibration. The pulse backflushing is a signal given to the solenoid valve by the parameters preset by the controller, and the diaphragm of the solenoid valve is instantly opened and closed, so that the high-pressure gas enters the blowing pipe, and the dust of the surface of the filter cartridge is shaken off by the rapid expansion force of the gas, and the gas pressure is generally We set it to about 6 kg. Mechanical vibration cleaning is often used in small single-unit filter cartridge dust collectors. It uses the shaking force generated by the eccentric device on the dust collector's flower plate to clean the dust. This action requires operation after shutdown.
No matter what kind of cleaning method, the good habit of regularly removing the dust of the filter cartridge is beneficial to the maintenance of the filter cartridge, prolonging its service life and saving the cost of repairing and replacing the equipment for the customer.