Chili sauce filling machine correct operation process
In fact, the operation and use of the filling machine is very simple. As long as the equipment operating procedures are strictly followed, many unnecessary troubles can be avoided, and the production efficiency of the enterprise can be effectively improved, and the chili sauce filling machine can be extended very well. Service life.
How to connect the mobile phone to the PTZ Indoor Camera How to connect the mobile phone to the monitoring camera
PTZ Indoor Camera,Mini size WiFi ip camera,300 mah rechargeable battery,Motion DVR Hidden Spy Camera,Mini Hidden Spy Camera
PTZ Indoor Camera,Mini size WiFi ip camera,small Battery Camera PTZ,Motion DVR Hidden Spy Camera,Mini Hidden Spy Camera Shenzhen Fuvision Electronics Co., Ltd. , https://www.szsolarcamera.com
First of all, before using the filling machine, it is necessary to check the box first, whether the whole machine is in good condition, whether the electrical components are neat, whether the connection of each line is firm, and there is no debris in the hopper. This can avoid equipment damage and production stagnation during the operation of the equipment. Then, the pepper sauce filling machine is energized to check, and the main power switch of the filling machine is turned on. After the power is turned on, the three-phase four-wire 380V is connected, and the zero line must be connected. First check if the steering gear is turning correctly. The steering is based on the direction indicated by the mixer chain. If it does not match, please interchange it on the connector of the power cord.
Secondly, press the mixer switch of the filling machine to start, check the direction of the drive according to the arrow, and then press the working switch to start the photoelectric sensor. After the program is normal, the material can be poured into the hopper and the mixer is started. Since the chili sauce filling machine is in the form of volumetric metering, there is a filling process at the beginning, because the container with a larger capacity should be placed on the workbench first, and then the filling can be started, and the amount of the filling is self-contained. Adjust the amount of filling required. In the process of adjustment, it must be adjusted according to the instructions for use to avoid damage to the equipment or waste of product filling.
Finally, the working speed of the chili sauce filling machine is about 30-40 bottles per minute. The operator must be familiar with and master the filling rules, rhythmically put bottles or bags, and rhythmically take the bottles or bags and take the bottles. If there is a sudden abnormal discharge during the use of the refilling machine, or if there is an abnormal phenomenon such as air bubbles when discharging, immediately stop the power and stop the machine, and find out the cause of the failure and then repair it before continuing to work. If the material is not discharged, it is strictly forbidden to work continuously, otherwise it is easy to burn the motor or cause the accessories to burn out. It is also important to note that in the operation of the equipment, do not operate the machine without materials. You can use water or detergent to test the machine and clean the machine.
1. Place the camera in position and connect it correctly to the monitoring settings.
2. Since the connection with the mobile phone requires a network, connect the router to the computer. After debugging, insert one network cable into the router and the other into the camera, and then connect the power supply.
3. At this time, turn on the computer, turn on the background of the camera, click [Wireless Function], select [Connect to Wireless Router], and then click [OK] to indicate that the installation is successful.
4. You need to find a network remote monitoring system client corresponding to the mobile phone system and install it on the mobile phone. WiFi camera 1080P hidden
5. Log in to the network remote monitoring system client, click the icon [Add Device], enter the user name and password of the home network monitoring camera, and click Save.
6. At this time, you can open [Device List], and its page will display the name of the remote monitoring camera. You need to click the device name, and then click the channel icon above to successfully connect.