How to prevent the deficiency of wheat caused by improper fertilization

Nitrogen deficiency symptoms and correction techniques. When wheat is deficient in nitrogen, the plants are slender, erect, sparsely colored, yellowish until dry or dead. The stem is purple-green, with few tillers, small ears and few grains. Nitrogen deficiency in wheat can be applied to urea, and 10 kg of seedling fertilizer should be applied during the greening period. After topdressing at the jointing and booting stage, pay attention to the appropriate amount of topdressing and attacking fertilizer. Or spray the 2% urea solution twice in time, at intervals of 7 days, and then apply 20 kg of ammonium bicarbonate or urea 7 kg to 8 kg per mu.

Phosphorus deficiency symptoms and correction techniques. When the wheat is deficient in phosphorus, the leaves are green and slightly purple, with slow growth and few tillers. The stems are short and slender, with delayed heading and maturity, and fewer spikes and small grains. After the symptoms of phosphorus deficiency are found in wheat, 200 grams of potassium dihydrogen phosphate can be applied to the surface of 30 kg of water.

Potassium deficiency symptoms and correction techniques. When the wheat is deficient in potassium, the leaves are blue-green, the leaves are weak and curled. The tip and edge of the old leaf turned yellow, so that it was dry and burnt like it. The stems are weak, short, short between nodes, with few spikes and easy to fall. After the discovery of potassium deficiency symptoms in wheat, generally apply 10 kg of potassium sulphate as the base fertilizer or seedling stage combined with top dressing or foliar spray 1% potassium chloride aqueous solution or 0.2% potassium dihydrogen phosphate aqueous solution, or apply sulfuric acid in the rhizosphere strip. Potassium is 5-7 kg per mu.

This article URL: How to prevent the symptoms of wheat planting deficiency syndrome and prevent the deficiency of wheat caused by improper fertilization

Mildew Tape

1. Material of our mildew tape

1) Transparent acrylic adhesive + polyester, thickness: 0.5mm and 0.8mm

2) PVC + acrylic adhesive, thickness is about 1.5mm, different colors for choosing.

3) PE + butyl adhesive, long serfice life and and good temperature resistance.

2. Features of our mildew tape

1) Good adhesion and soft material, can be adhered to many different surfaces.

2) Waterproof, resist the water, oil and dust go inside the cracks and corners, resist mildew.

3) Long service life, easy to clean.

4) Different colors and patterns for choosing.

5) Easy to operate, Do not need to use other complicated tools, the waterproof tape is affixed around the sink, use PE Self Adhesive, repeatedly press several times.It adhesive sticks well can seal the gap between the tile and the wall.

3. Applications of our mildew tape

Widely used for sealing the seams of gas stove, sink, basin, bathtub and walls, it could prevent them from getting mouldy and black, keep your kitchen and bathroom clean and new for a long time.

Mildew tape,Anti-mildew tape,anti mildew tape,caulking tape,caulking strip,caulk strip,caulk tape

Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytapes.com