Polyethylene sulfate special flash dryer

Polyethylene sulfate special flash dryer

Release time: 2016-09-20

Article label: Polyethylene sulfate special flash dryer, polyaluminum sulfate dryer, polyaluminum sulfate flash dryer, dry polyaluminum sulfate, polyaluminum sulfate dryer, flash dryer

Polyaluminum sulphate is a composite polymer with large molecular structure and strong adsorption capacity. It is widely used in purification treatment, and the water purification effect is superior to all traditional inorganic water purifiers. The white polyaluminum chloride is a white or milky white powdery fine powder obtained by flash drying of aluminum hydroxide powder and high purity hydrochloric acid.

Advantages of polyaluminum sulfate flash dryer:

The flash dryer is a kind of airflow drying equipment system with no torsion damage. It is inorganically connected with fluidization, swirling, spouting, destruction and grading. It is a fluidized craft, swirling craft, and spray. A combination of craftsmanship and degradation of the spread of thermal art for drying moisture outside the material. The wet material is separated into the heated gas stream by the dry air duct of the flash drying equipment, and drying takes place for a few seconds. Flash dryer equipment has not been used in many industries, including food, chemicals, minerals and polymers. The combination of materials is also common, including powder, block, granule, flake, paste, gel. It can be used in the form of a slurry or the like. (In the case of slurry, paste or viscous materials, reverse mixing of dry and wet materials is necessary). The flash drying equipment is one of the popular drying equipments for the growing use of the category Zui. The domestic flash dryer is also called the cyclone dryer and the rotary quick dryer. The flash drying equipment is typical of fluidized drying, which not only realizes the continuous operation of dynamic drying, but also reduces the static failure of static dry heat, labor intensity, pollution and extravagance, so that the chemical products are drying units. It is effective to achieve the same effect, quantity, efficiency and perfection.

The technical advantage and specific application of the polyaluminum sulphate flash dryer, the slave of the flash drying equipment is a cylindrical drying chamber, which is composed of the bottom broken fluidized section, the external drying section and the top grading section, and can complete the materials at the same time. Destruction, drying, grading, etc. Others include heaters, feeders, agitation rupture systems, classifiers, drying tubes, cyclones, bag filters, and fans. The natural air is heated and removed by heating, and then enters the stirring and breaking drying chamber from the bottom of the dryer at the appropriate blowing speed by the air inlet of the flash drying equipment, and spirally rises. At the same time, the material is sent into the tower by the screw feeder, and is taken. The hot air is enriched and heat exchanged, and the material has strong shearing, blowing and torsion effects. Therefore, the material is micro-materialized by centrifugation, shearing, bumping and friction, and the heat transfer is enhanced. At the bottom of the flash drying equipment, the larger and drier pellets are mechanically broken under the action of the agitator, and the particles with lower moisture content and smaller particle size are entrained by the airflow, and are further dried outside the rising process. Refined, the dried product of the flash dryer manufacturer is discharged through the cyclone splitter, and the dusty exhaust gas is discharged into the atmosphere by the pulse bag filter.

Small 2D LiDAR Sensor

IT02S, is JRT new product in the early 2019, which is a single-point LiDAR sensor, also called tof distance sensor. With a micro size of 46x17x7mm, customers can widely use in many Laser Measurement Solutions. The lidar distance sensor can measure 12m short-range with high frequency up to 100hz. It's great for Unmanned Aerial Systems. If you need us send you data sheet and spec for this products, offering sample as well, pls tell us, thank you.

IT02S Mini Tof Sensor Module Diagram

Parameters of IT02S: