Precautions for the use of vegetable cleaning lines

The vegetable cleaning processing line is equipped with a circulating water pump and a filtering water tank to realize the recycling of the washing water, save water, and replace the new water according to the actual production situation. The equipment conveyor belt motor can realize the adjustment shifting function, and the washed vegetables are transported through the net chain, automatically Feeding, automatic discharging, adjust the conveying speed of the conveyor belt according to production needs. After the cleaning is completed, it is transported to the next process, and the product is sprayed to reduce secondary pollution.

First check whether the components of the equipment are in good condition. After the inspection, open the inlet valve, make the water reach the return water level, close the small valve, open the blast, circulating water pump, conveyor belt, pour the material, adjust the speed of the mesh belt according to the material. To ensure the residence time of the material in the water to ensure more thorough cleaning of the material. During the use process, it is necessary to regularly clean and discharge according to different materials; properly adjust the water supply and spray water supply to make the cleaning more water-saving. Keeping the ventilation, dryness and cleanliness of the equipment workplace is conducive to long-term efficient operation of the equipment and optimization of working environment conditions.

Regularly test the insulation performance of the vegetable cleaning processing line, check the aging electrical components regularly, check the grounding wire, and ensure that the equipment is well grounded. This project must be carried out by an electrician with professional experience. The power supply should be tested periodically to confirm that it meets the power supply voltage requirements of the equipment. Open for long periods of time under unstable power sources that are too high or too low. For the transmission mechanism, grease such as butter and engine oil should be regularly added as required, and the gear oil of the reducer should be replaced regularly to ensure that the moving parts work under good lubrication conditions.