New Peel-Free Large Corn Thresher Correct Use Guide
New Peel-Free Large Corn Thresher Correct Use Guide Due to the development of science and technology and the progress of society, the rural and the original ratios have also undergone earth-shaking changes. The crops are basically mechanized from planting to harvesting. In addition, the current pace of life is fast, and there are many employment opportunities. Most of the rural men are working outside the home. All of them are old people and women at home, which creates opportunities for the development of agricultural machinery. In recent years, the large-scale corn thresher has developed rapidly, from the original two-axis, five-axis, six-axis to the current big three-axis; from the original manual development to the current automatic; from the original low production to high output From the original peeling to the current peeling. Therefore, the large-scale corn thresher is developing rapidly, but there are still many villagers who will not use the large-scale corn thresher correctly. It is necessary to popularize the correct use of the large-scale corn thresher in the current rural problems. SMART Digital Bluetooth Hearing Aids SMART Digital Bluetooth Hearing Aids Shenzhen Sunshine Technology Co.,Ltd , https://www.yatwinsz.com
1, the installation of large corn thresher is from the factory, pay attention to the threshing machine must be leveled, otherwise the machine will shake, the corn thresher will be broken for a long time.
2. The installation of the climbing machine must be under the lower grain outlet. If it is not properly installed, it will block the corn borer and affect the feeding, thus reducing the efficiency of the threshing machine.
3, because the large corn thresher is operating in the field, dust is more, so the bearings must be refueled every day.
4. Before starting the first time, you must ensure that each single machine is forward.
5, the order of each boot is: corncoil conveyor, corn conveyor, corn thresher, climber.
6. When dehumidifying the corn, each car should pass through the observation hole on the side to see if the material is blocked. If there is any blockage, it should be disposed of in time.
7. When dehumidifying the corn, the sieve surface should be treated as well, otherwise the sieve surface will be blocked and the corn kernels will be dirty inside.
8. Pay attention to the corn inside the pit. Do not mix debris (bricks, stones, bags, etc.) and break the corn thresher.
9. If the fan sucks or sucks cleanly, you can adjust the air volume on the back of the lower part of the feed port to adjust the air volume.
10. The order of each shutdown: the climber, the corn thresher, the corncob conveyor, and the corn kernel conveyor.