How to install the Siesta gas oven
The gas oven produced by Guangzhou Saidida Machinery Equipment Co., Ltd. has a beautiful appearance. According to your usage habits, we provide a pull-down door handle. The oven can be stacked and controlled independently. Each layer can be controlled by the customer. The production space to choose to order. The internal use of microcomputer control ignition, uniform firepower, good thermal insulation performance, and equipped with flame monitoring and flameout alarm to ensure safety. The product is well insulated, layered and used independently, and can be equipped with a humidifying device. Let me talk about the installation of the gas oven: 1. After stacking each layer of furnace, connect them with connecting pieces. 2, the right side of the oven should be more than 200MM from the wall, the back and left should be more than 100MM from the wall. 3. An exhaust fan should be installed in the workroom to ensure adequate air circulation. 4. Connect the gas pipelines between each floor and connect them to the liquefied bottled gas or pipeline natural gas. Here, you should be reminded that you must not use the pipe gas made of coal, commonly known as water gas, otherwise it will cause Danger. After the connection, for safety, we can apply soap bubbles to each interface to check the interface for leaks. 5. Connect 220 volt AC power. Bedsore Cushion,Bed Sore Pads,Anti Bedsore Cushion,Bedsore Cushions Hebei Dingli Medical Apparatus and Instrument Co., LTD , https://www.dinglimed.com