Jaw crusher assembly problems and solutions
Speaking of the lithotripter, it is not difficult to present two kinds of gravel equipment in the brain, one for medical use and the other for industrial use. The development of industry is advancing by leaps and bounds. The crushing machine for industrial use is also often understood as the crusher equipment. As a crusher manufacturer, Yuhui talks about the problems that are easy to occur when assembling the jaw crusher and the solution: First of all, the assembly of the jaw crusher requires the installation of the main crushing plate. It needs to be firmly attached to the jaw plate. The soft metal is used as the gasket to ensure that the pad is flat and then bolted. During the working process, the crusher regularly checks whether the broken plate is loose. If it is adjusted, it will prevent breakage or wear, so as to reduce the service life of the broken plate. Secondly, the jaw crusher is used for raw materials with high hardness and large crushing. It is normal to have strong vibration during work, and the reinforced concrete structure is used stably. If there are signs of cracks and looseness after running, even if it is adjusted, it will not cause adverse effects on safe operation. Finally, if the crusher nut is loosened, the degree of wear of the crushing plate is intensified, and then noise is generated. In severe cases, the broken plate is broken or broken to stop the equipment and affect normal production. This requires checking the bolts and nuts tightly before starting the machine to completely solve the problem. YT-H706 YT-H706 Shenzhen Sunshine Technology Co.,Ltd , https://www.szyatwin.com