Structure, installation and adjustment of linear vibrating screen
I. Overview The linear vibrating screen is driven by a double vibrating motor. When the two vibrating motors rotate synchronously and reversely, the exciting force generated by the eccentric block cancels each other in a direction parallel to the motor axis, and is combined in a direction perpendicular to the motor shaft, so that the moving path of the screening machine It is a straight line. The two motor shafts have an inclination angle with respect to the screen surface. Under the combined force of the excitation force and the material self-gravity, the material is thrown up and jumped forward in a linear motion on the screen surface, thereby achieving the purpose of screening and classifying the materials. Second, the structure of the linear vibrating screen The linear vibrating screen is mainly composed of a screen box, a grid frame, a screen mesh, a vibration motor, a motor pedestal, a vibration reducing spring and a bracket. Third, installation and adjustment:: 1. Connect two motor power cables first. (No special requirements, just connect two) 2. Connect the connected motor power cable to the three-phase power cable. 3. The running direction of the two motors must be relatively moving (simultaneously running inward or at the same time). If running in the same direction, just adjust the motor wiring (one set does not move, just exchange the other two sets of power lines) can). 4. Motor pedestal: The motor pedestal of the standard type (the motor is installed under the screen box) can be moved. The connecting screws must be tightened before use. In particular, the new screen must be tightened repeatedly three days before the trial to avoid loosening. ACCIDENT. 5, regular inspection and maintenance Before starting the sieve machine, it should be checked whether there are any obstacles that hinder the operation of the screen machine. Whether the joint bolts are tight at all, especially the vibration bolts of the vibration motor, the support base and the sieve plate should be re-tightened. Before parking, the feeding should be stopped first, and the screen material should be stopped before parking. After parking, clean the materials and debris on the screen surface. The vibration motor or exciter should be refueled once after 3 months of use, and it should be repaired once every six months and overhauled every year. Beeswax is obtained from the honeycombs of bees after the Honey has been removed by draining or centrifuging. The combs are melted with hot water, steam or solar heat; the melted product is filtered and cast into cakes of yellow beeswax. With detoxification, wound healing, tissue regeneration, pain relieving effect. Commonly used in the ulcer not healing, ecthyma erosion, ulceration of trauma, burn and scald. Bee Wax, Organic Beeswax, Pure Natural Beeswax, White Refined Beeswax Easy Food (Jiaxing) Co., Ltd. , https://www.jxeasyfood.com