Aging cabinet / aging room / high temperature aging laboratory function introduction

Aging cabinet / aging room / high temperature aging laboratory function introduction housing structure: generally used insulation board (EPS color steel plate or rock wool board) assembled on site, room size is designed according to customer requirements. Configure the ontology system according to different requirements,

Main electrical system, control system, heating system, temperature control system, intake and exhaust system, heating system, time control system, test load, etc., can be detected through this test procedure
Defective products or defective member <br> <br> duct system: usually heating fan and air duct system is attached to the aging room at the top, the space not occupied by other, aging cabinet / Aging room / temperature aging test room functions generally by a duct system a circulating air system and a superheated exhaust system,

The inner circulation air is heated by the heater and sent back to the room by the air blower through the heat preservation air duct, and the cycle is repeated to maintain the room temperature within the set range. When the room temperature exceeds the alarm set value,

The exhaust fan is started, the indoor superheated gas is taken away, and the outdoor cold air enters the room to mix with the hot air, so that the room temperature returns to the normal aging cabinet/aging room/high temperature aging test room function introduction control system: two-stage PID adjustment heating is adopted The quantity can realize precise control of the room temperature, and the temperature controller can display the real-time display of any six points in the room.

Convenient for customers to accurately grasp the temperature inside the room
. Accurate temperature control and high precision. Thanks to the unique air duct system design and electronic control system, the temperature uniformity of the whole room can be maintained, which is much higher than similar products.

2. The aging room has a wide temperature range and is continuously adjustable. It can be set arbitrarily in the range of normal temperature ~60 °C (normal temperature ~85 °C). Higher temperature products can be designed if specifically requested by the customer.

3. The system protection function is complete, which can ensure safe, long-term, stable and trouble-free operation.

4. The aging room has beautiful appearance, convenient construction and short construction period.

Product use: Widely used in power electronics, computers, communications, bio-pharmaceutical and other fields.

Details 1. The main technical parameters:

1.1 Temperature range: normal temperature ~ +60 ° C (normal temperature ~ 80 ° C)

1.2 temperature fluctuation: ± 0.5 ° C;

1.3 Temperature deviation: ± 2 ° C

1.4 Room size: as required;

1.5 operation mode: adjustable temperature, constant operation or program operation (optional touch screen program operation)

1.6 installation power: 380V; 50Hz;

Control system and safety protection measures:

The design of electric control refers to "Design Specification for Low Voltage Distribution" GB50054-95, "Design Specification for Power Supply and Distribution" GB5002S2-95, "Code for Construction and Acceptance of Grounding Device for Installation of Electrical Installations" GB50169-92,

Standardized electronic control design with multiple protection functions, safe and reliable.

a. Electric heat anti-dry burning, when the fan is faulty or the temperature inside the air duct is too high, the whole power is automatically cut off, and the alarm is alarmed.

b. The electric heating is linked with the fan design. When the fan fails to start, the heater cannot be started separately.

c. The heater is connected with high temperature resistant wire and 300OC does not burn.

d. Install explosion-proof lighting indoors to improve lamp life and prevent bulb blasting.

e. The library body uses flame retardant insulation material, which has good insulation performance and high safety factor.

f. Over-temperature sound and light alarm function: When an over-temperature condition occurs during aging, the red light is on and the buzzer sounds.

Face Shield

Face shield is a protective device commonly used to protect wearer's entire face (or part of it) from hazards such as flying objects and road debris, chemical splashes (in industry), or potentially infectious materials (in medical and laboratory environments).

The shield can be made of PC, PVC, wire mesh for use in different workplace.


face shield

Face Shield,Safety Face Shield,Clear Face Shield,Pc Face Shield

Greateagle Safety Products Co., Ltd. , https://www.greateaglesafety.com