Operation of Chinese medicine decocting machine to prepare decoction
Specifications
14.Battery charge: by USB charge or wireless charge, take 2 hours
Advantage
How it works
Bladder Ultrasound Scanner,Bladder Ultrasound For Old Folk,Bladder Ultrasound Machine With 4D,Bladder Scan With Ultrasound Guangzhou Sonostar Technologies Co., Limited , https://www.sonoeye.com
1. Decoction equipment material decocting machine: Korean DHJ-D1 type (capacity 8000m1), DHJ-D2 type (capacity 20000m1), DHJ-D3 type (capacity 40,000m1).
Packing machine: DH-I type.
Plastic packaging roll: 400m/roll, imported or made in Korea.
2, decoction method 2.l, decocting machine selection generally l ~ 3 doses of traditional Chinese medicine selected DHJ-D1 type, 4 ~ 7 doses of traditional Chinese medicine selected DHJ-D2 type, 8 or more selected DHJ-D3 type.
2.2. Soak the prepared medicinal preparation evenly, put it into a decocting bag made of special cloth, place it in a suitable stainless steel container, add appropriate amount of water to soak for 0.5~1h, light flower, leaf, whole grass Chinese medicine soak The time can be shorter, and the ore, shellfish, and roots can be soaked for a longer period of time.
2.3. Adding water The immersed medicinal agent is placed in a decocting machine, and each dose is added in 340 ml of water. Chinese medicine should be added with water 1700ml.
2.4, after boiling and adding water, close the decocting machine cover evenly tightened, the heating time temperature is set at 40 ~ 50min; between 110 ~ 120 ° C, depending on the amount of drug appropriate increase and decrease time and temperature. Press the button and the decocting machine will start to cook automatically.
2.5. After the package is boiled, start the valve from the decocting machine to the packaging machine. First, put a small amount of the medicinal juice (about 50m1) into the packaging machine, quickly close the valve, rinse the packaging machine with tap water, and then use boiling water. Rinse and drain, then open the valve and drive the juice into the packaging machine. At the same time, turn the decocting machine screw to squeeze the medicinal juice into the packaging machine as much as possible. Then start the packaging machine to pack and discard the first bag of medicinal juice. , collect the remaining juice. Usually 2 doses of 2 bags, each bag is about 120ml.
3, decoction attention 3.1, the immersion time of the agent should be in place, the soaking time is short or not soaked, because the temperature rises during boiling, the surface of the medicinal material is gelatinized, the internal hard heart is not conducive to the effective ingredient fried. At the same time, adding water is difficult to control.
3.2. The amount of water added is crucial. After adding less water, the number of concentrated bags of the drug juice is reduced; if the amount of water is increased, the drug juice is relatively light, and the number of bags of the drug juice is increased, which affects the quality and is not conducive to taking.
3.3. Dispense a small amount of the medicinal juice into the packaging machine before packaging, and discard the first bag of medicinal juice. The purpose is to drain the last dose of medicinal juice or water remaining in the pipeline to avoid the influence of the drug (water). The quality of the medicinal juice.
1. Scan mode: array probe, 4D scan;
2. Supporting system: Apple iOS;
3. Measuring range: 10ml ~ 2000ml;
4. Automatic measurement inaccuracies: <5%;
5. Scan and process<2 seconds;
6. Scanned image display frame: 10 frames / seconds;
7. Case Storage: by tablet or mobile phone;
8. Printing: external wireless thermal printer;
9. Battery: Built-in battery, charge one time can work on more than 200 patients;
10. Power: Wireless charge or by USB cable charge;
11. Dimension: 180mm (length) × 60mm (width) × 60mm (thickness);
12. Weight: 420g.
13.Battery working time: 3 hours(according to whether keep scan)
- Only one probe, convenient for carry
- Wireless, convenient for operation
- 4D array scan, very clear image
- High accurate (5% inaccuracies)
- High speed on scan and process (2s)
- Without distortion of mechanical scanning
- More advanced algorithm, more powerful bladder wall recognition technology(High recognition
rate for the bladder wall with air), more accurate contour technology, higher accuracy of
the probe makes scanning results more accurate.
- New algorithm, the measurement results are not subject to the bladder shape and size.
No need to select Gender, Age group and no need to consider special cases such as the effect
of hysterectomy on the measurement results. Good compatibility for different bladders, no
Ubstantial error when measuring small volume or special shape bladders, easier to operate
and use.
- High precision rotary encoder, precise positioning, never need to calibration.
- Waterproof probe
The Sonostar wireless probe is a mini ultrasound scanner without a screen. We minimize the components of a traditional ultrasound into a small circuit board built into the probe, and showing image in smart phone/tablet through Wifi transferring. image can both show in screen and tablet.Image transferring through internal wifi from probe, no need external Wifi signal.