Precautions after the separation operation of the low-speed large-capacity refrigerated centrifuge
Precautions after the separation operation of the low-speed large-capacity refrigerated centrifuge (hereinafter referred to as the centrifuge): First, the centrifuge can not help by hand: After the separation is completed, it should be stopped by the centrifuge, and it can't be stopped by hand to prevent the sediment from bulging, damaging the centrifugal shaft and hurting people. Second, timely removal of the centrifuge rotor: After the centrifuge is used, remove the rotor from the centrifuge chamber and turn off the power. Open the top cover of the centrifuge and raise the temperature of the centrifuge chamber to room temperature. After the centrifuge is used, if the rotor is kept in the centrifugal chamber, the rotor will be stuck on the centrifugal shaft for a long time. In order to remove the rotor, it must be struck hard, which can seriously damage the centrifugal shaft and even damage the centrifuge. Therefore, it is important to remove the rotor after the separation is completed. Third, the maintenance of the centrifuge after use: Remove the dirt in the centrifuge chamber in time, and clean the condensation water in the centrifuge chamber with a soft cotton cloth. Fourth, fill in the centrifuge use record: Each centrifuge is equipped with a record book, registered users, separated samples, speed, time of use, and whether the centrifuge works abnormally. SMART Digital Bluetooth Hearing Aids SMART Digital Bluetooth Hearing Aids Shenzhen Sunshine Technology Co.,Ltd , https://www.szyatwin.com