Construction requirements for various types of buildings in hatchery
Requirements for various types of buildings in hatchery: (1) Eggs that have been sterilized in the egg receiving and loading room. In this room, eggs that are damaged and do not meet the hatching requirements are removed. Then, the eggs are loaded and placed on the cart. Therefore, the area of ​​this room should be wider to facilitate the laying of egg trays and the operation of egg carts. Keep at room temperature 18~20°C. (b) The fumigation chamber is used for fumigation or spray disinfection to enter the planted eggs. This room should not be too large and should be counted as the total number of fumigated eggs. The structure of doors, windows, walls, and ceilings should be tight, and helium installations should be provided. (iii) Egg storage room The walls and ceiling of this room should have good thermal insulation performance and be slow and full of ventilation. It is best to set the air conditioner to keep the room temperature at 13~15°C. (IV) Incubation Room The size of this room is determined by the type of incubator used. The height of the hatchboard from ceiling to ceiling should be greater than 1.6m. Regardless of double-row or single-row discharge, work channels should be left. Drainage trenches should be set about 30cm in front of the incubator, the iron fence on the cover, the grid hole 1.5cm, and keep with the ground. Flush. The water mill floor in the hatchery should be smooth and smooth. The carrying capacity of the ground should be more than 700kg per square meter. Keep room temperature 22~24C. Exhaust gas from the incubator chamber is discharged through the water bath so as not to be sucked into the air inlet system after being blown out to the outdoors. The chicks are then brought back into the rooms of the hatchery. Professional hatchery should set up preheating room. (e) The basic requirements for a hatching room are the same as those in the hatchery. (6) A washing room shall be set up beside the hatching room and the hatching room of the washing room for washing the egg tray and the hatching tray. A soaking tank shall be provided in the washing room, and drainage culverts and sedimentation tanks shall be provided with a leaky plate. (g) The chicks' sex identification and room temperature should be maintained at 39~3l°C. (8) Temporary storage room after boxing in the chick storage room, with an outdoor awning to facilitate loading in rainy days. Room temperature requires around 25°C. (9) The inspection room shall be equipped with adjustable light and shade blinds.
Portable design,joystick-Controlled,4-way
Articulation,VT Industry Borescope has different diameters of the cameras that can meet your needs,easy using
and carrying,so it is a cost-effective system.Also the
application of the videoscope is very wide,such as aircraft,automotive,petrochemical,machinery,building and many other types of field applications.
Vt Industry Borescope,Industrial Usb Digital Borescope,Industrial Inspection Borescope,Flexible Industrial Video Borescope Zhengzhou Runde Dellonscope Co.,Ltd. , https://www.china-borescope.com