1. Care should be taken when loading and unloading the rotor. When loading and unloading, the connecting screw should be lifted slightly to operate. Do not use excessive force. Do not force the rotor laterally to avoid bending the rotor.
2. Please do not put the DV-S rotary viscometer with the rotor on or off.
3. Connect the rotor and the screw end face and thread to keep it clean, otherwise it will affect the rotor shake.
4. DV-S rotary viscometer should be dragged by hand when lifting, to prevent the viscometer from falling due to its own weight.
5. After replacing the rotor, please enter the new rotor number in time. The rotor that is redeemed after each use should be cleared in time.
Clean (clean) and put it back in the rotor frame. Please do not leave the rotor on the instrument for cleaning.
6. When changing the liquid to be tested, please clean the rotor and rotor protection frame in time to avoid mixing by liquid.
Measurement error caused by confusion.
7. The DV-S rotary viscometer matches the rotor one-to-one. Please do not confuse the rotor.
8. Please do not disassemble and adjust the instrument parts at will.
9. After installing the rotor, do not rotate for a long time without liquid, so as not to damage the shaft tip.
Sample Release Reagent Kit Of COVID-19
The Sample Release Reagent Kit is intended for the pre-treatment of the samples to be tested. The substances to be tested in the specimens can be released from other substances to facilitate the use of in vitro diagnostic reagents or instruments.
Protein structure is rapidly destroyed by denaturation and biochemical reagents, releasing the nucleic acid.
DNA release reagent,RNA release reagent,viral release reagent,virus release reagent,sample release reagent kit
Shenzhen Uni-medica Technology Co.,Ltd , https://www.unimed-global.com