Ice machine routine maintenance and use
The ice maker is a refrigeration mechanical device that generates water by cooling the refrigerant from the refrigerant of the refrigeration system through the evaporator. The refrigeration system uses a water carrier to produce ice after passing through a certain device in an energized state. Shanghai Jiu Ba Industrial Co., Ltd. is a supplier of high-quality ice machine, and ensure that the relevant service, welcome to buy ice machine! Here we will specifically analyze the routine maintenance and use of the ice machine : 1. The ice machine should not be placed in an open air environment. It should be installed in a safe, clean and well ventilated environment, and should not be exposed to direct sunlight or rain. 2, the ice machine can not be close to the heat source, the use environment can not be lower than 5 ° C, not higher than 40 ° C, so as not to affect the heat dissipation of the condenser too high temperature, can not achieve a good ice making effect. 3, the ice machine should be installed on a stable platform, and adjust the anchor screw at the bottom of the machine to ensure the machine is placed horizontally, otherwise it will cause no ice and noise during operation. Space should be left around. In order to facilitate heat dissipation, the left and right spaces on the left side of the machine should not be less than 150mm. 4, the ice machine should use the specified independent power supply in line with national standards, the power supply should ensure reliable grounding, and equipped with fuses and leakage protection switches, etc., voltage fluctuations should not exceed ± 10% of the rated voltage. 5, the ice machine should use the water source in line with local drinking water standards, and install filters, etc., to remove impurities in the water, to avoid blocking the water pipe, pollute the water tank and ice mold and affect the ice making performance. The water temperature is at least 2 °C, the highest is not more than 35 °C, the water pressure is at least 0.02 Mpa, and the highest is 0.8 Mpa. 6. The ice machine must unscrew the inlet hose head for two months to clean the inlet valve screen to prevent the sand mud impurities from clogging the water inlet, which causes the water intake to become smaller, resulting in no ice. Although the ice machine will discharge the cooled residual water in the water tank at the end of each ice making process to achieve the cleaning effect, it can effectively reduce scale generation in the evaporator and water circulation system, but generally six months. Left and right, also use the ice machine cleaning agent and disinfectant to clean and disinfect the water pipe, sink, storage refrigerator and water retaining plate, and rinse, the ice cubes generated during the cleaning process can not be eaten. When not in use for a long time, it should be cleaned, and the ice mold and the moisture in the box should be dried with a hair dryer, and placed in a place free of corrosive gas and ventilated and dry, to avoid open storage. 8. Care should be taken when handling the ice machine to prevent severe vibration. The handling inclination should not be less than 45 degrees. After long-distance transportation, the ice machine should be placed for 2-6 hours before the mechanism ice can be opened. The above information about the routine use of the ice machine is provided by Shanghai Bashu. For more information, please click : Http://  Shanghai Bayu Industrial Co., Ltd. stock to provide you with quality ice machine , and to ensure related after-sales service, welcome to buy ice machine ! We also provide you with other laboratory equipment and consumables, if you need, you can contact us. National toll-free hotline: 400-180-588
Digital Radiography made affordable, Created to meet the needs of community to hospitals and private radiology practices, it enables the price-sensitive customers to join the drive to go digital.The versatile floor mounted radiography system enables you to go from film to CR to DR. Flooe-mounted easy for installation and operation.
United-imaging according to the international advanced processing mode and standardlize design. the parts are made with precision CNC machine and moulding. Which adopt high degree of standardized, reasonable and compact structure. With reliable, durable and elegant appearance and advanced processing technology.
X-Ray Digital Machine,X-Ray Digital Machine In Medical,X-Rays Digital Medical Machine,Medical X-Ray Digital Imaging Machine Shanghai Rocatti Biotechnology Co.,Ltd , https://www.ljdmedical.com
The United-imaging is floor mounted system comprises a radiographic table with integral floor guide rail and a wallstabd. Requiring little room preparation, it is easy to install.
