Ultra-clean workbench working principle and maintenance
The ultra-clean workbench is a kind of partial purification equipment, which uses air clean technology to make the space in a certain operation area reach a relatively dust-free and sterilized state, mainly composed of three parts: an air filter device, an ultraviolet sterilizer, and a console. working principle The air is sucked into the pre-filter through the fan, and the high-efficiency filter is filtered through the static pressure box, and the filtered air is sent out in a vertical or horizontal airflow state, so that the operation area reaches 100-level cleanliness, and the requirements for environmental cleanliness are ensured. . The ultra-clean workbench is divided into a vertical flow ultra-clean workbench and a horizontal flow ultra-clean workbench according to the direction of the airflow. According to the operation structure, it is divided into two types: unilateral operation and bilateral operation. According to its application, it can be divided into ordinary super-clean work. Taiwan and biological (medicine) ultra-clean workbench. Operating specifications: 1, the operating environment such as a clean bench check ambient temperature, air quality, power, etc., using the registration information; 2. Place the equipment required for the experiment on the surface of the ultra-clean workbench . Place the material that has been sterilized, such as the culture medium, on the left side, and place the tool on the right side; 3 , pull down the glass baffle, turn on the UV lamp for 30 minutes for surface sterilization; 4 , after 30 minutes, turn off the UV lamp, turn on the fan to adjust to the appropriate air volume, turn on the light; 5 , open the glass baffle to about 20cm high, both hands can be operated smoothly in the console, wipe the hands and countertops with 75% alcohol; 6, lit the kerosene lamp, aseptic operation strictly follow the norms; 7. After the operation is completed , clean the experimental equipment out of the aseptic table, 75% alcohol to wipe the table, turn off the lighting, fan and baffle. 8, turn off the ultraviolet light irradiating UV light after 15 minutes. Precautions: 1. It is strictly forbidden to store items for a long time in the ultra-clean workbench; 2 , ultraviolet light is very irritating to the skin and retina, avoiding direct ultraviolet light, single layer glass can effectively block ultraviolet rays; 3 , the operation process should strictly abide by the aseptic operation specifications; 4, to avoid frequent switching light tube and UV lamp, extend lamp life; 5 , regularly check the filter material such as air filter, aging should be replaced. Shangyu Xingxing Instrument Equipment Co., Ltd. is located in Daoxu Town, Shangyu District, Shaoxing City, Zhejiang Province. It is an enterprise integrating production, product research and development, processing and trade. The company's main products: drying box series, incubator series, laboratory muffle furnace series, distilled water series, as well as clean workbench, air shower, fume hood, biological safety cabinet and other complete purification equipment. The company has a strong technical research and development team, a strong after-sales guarantee service system, is the linger of the Chinese laboratory complete sets of equipment manufacturers, welcome customers to buy. Heated Tobacco Products,Heated Tobacco Vs Vaping,Heated Tobacco Device,Heated Tobacco Vs Cigarettes KOKEN Co., Ltd , https://www.hnb-maker.com