How to make melon vegetable seeds germinate quickly and homogeneously
Seeds of melon vegetable seeds are generally hard and germinate slowly. To promote their rapid and homogeneous germination, they can be treated as follows before sowing: Cucumber seeds before sowing disinfection, soaked in warm water at 50 °C for 15 minutes, and constantly stirring, then add cold water to room temperature and then soaking for 2 to 5 hours, picked up after draining, put at 25 °C ~ 28 °C temperature under the germination, 2 Days, the roots of the radicles can be sowed. Put the seeds in warm water of 50°C～60°C before sowing, and stir constantly to make the seeds heated evenly. After 13-15 minutes, when the water temperature drops to 30°C, stop stirring, wash the seeds by hand, remove the seeds and remove them. The mucus is soaked in fresh water for 12 to 14 hours. After the seeds are sucked in enough water, they can be removed and wrapped in a thick cloth and placed in a germination box or other warm place (at a temperature of 30°C) to germinate. Turn it once a day to make the temperature inside and outside the seed pile consistent. At the same time to check the water condition, found that when the seeds are too dry, they should spray water in time and germinate within 3 to 4 days. Pumpkin seed sowing before the sun 1 to 2 days, soaked in warm water 50 °C ~ 60 °C for 5 ~ 10 minutes, constantly stirring, until the water temperature dropped to 25 °C ~ 30 °C, then soak for 6 hours, remove and drain at 20 The germination was carried out at a temperature of from -30C to <RTIgt;30C,</RTI> and good ventilation was maintained, and germination occurred within 2 to 3 days. The bitter gourd bitter gourd seed coat is hard. Before sowing, use wet sand millet to test seed wax (do not break the seed shell), soak it in warm water of 50°C～60°C for 10 minutes, keep stirring, continue to soak for 1～2 days after cooling. To make it absorb water. Soaking after germination can be placed at a temperature of 30 °C ~ 33 °C. Melon sowing before sowing 2 to 3 days, the seeds are soaked in warm water of 50 °C for 10 minutes, stirring constantly, with the water temperature natural cooling, soak for 1 hour, and then use 1000 times carbendazim seed disinfection 10 to 20 minutes, After being rinsed clean, wrap it in gauze and germinate at a temperature of 30°C. Hot Selling Medical Protective Suit,Protective Suit,Nonwoven Disposable Protective Suit,Spot Medical Protective Suit GULF STAR MEDICAL MANUFACTURING FZE , https://www.gulfstarmedical.com