Installation and commissioning of plate and frame filter press
The Vaginal Speculum, is used for gynecology inspection in hospitals and clinics, which is made of medical grade polystyrene.Different types of speculum could be supplied, such as side screw type,fastener type,rack type,Spanish type,middle screw type,big nut type,Screw Fastener Type etc.It is transparent color, which is for disposable use could prevent the cross infection from different painents.The Vaginal Speculums are approved by CE,ISO,FDA certificates, which are popular around the world. Vaginal Speculum,Disposable Vaginal Speculum,Plastic Vaginal Speculum,Medical Vaginal Speculum Hebei Orient Imp. & Exp. Co. Ltd. , https://www.orientmedcare.com
2. There should be enough space around the filter press for easy operation and maintenance.
3. The filter press should be placed horizontally on the floor, and the rear top plate should be fixed on the foundation with the foot screw. (Note: The bottom screw is generally only fixed to the rear top plate. Because the pull-drying has a certain downward bending due to the pressure of the plate frame, when the filter press is pressed, the pull-drying is straightened, resulting in a small displacement, if The two ends are fixed at the same time, which may cause the pressure to not be tight or damage the frame.
4. The material and specifications of the filter cloth are determined according to the filtered material, pressure and temperature. The appropriate filter cloth should be selected.
5. The plate frame is neatly discharged on the frame according to the requirements, and the processed filter cloth is neatly arranged on the filter plate. Note that the feed holes between the filter plates correspond to the rinsing holes.
6. Turn on the power and check if it is normal. The mechanical transmission should check whether the motor is reversing or not, whether the gearbox or the oil in the oil head of the head is full, and whether the screw and gear oil are added. The hydraulic drive checks whether the gear pump running sound is normal, whether the hydraulic system has leakage or not, and whether the piston rod is in and out smoothly.