Medical semiconductor compound annual growth of 12.3% IC design benefits
According to IC Insights statistics, the advancement and deduction of medical systems will boost the growth of IC, sensor and related semiconductor markets. It is expected that the medical semiconductor market is expected to grow by 17% this year, with an estimated value of US$6.2 billion. It is expected to be medical in 2013-2018. The market semiconductor production value growth rate will reach 12.3%, the output value in 2018 is estimated to reach 8.2 billion US dollars, the industry will grow steadily; and Taiwan related IC design is based on medical terminal devices, of which MCU is the main layout manufacturer, including Sheng Qun, Song Han With the new Tang and so on, the original IC design also cultivates heartbeat sensing. The legal person believes that the medical wearable device is the most promising field for Taiwanese manufacturers, and is expected to benefit from the growth trend of this medical industry. IC Insights pointed out that the medical market semiconductors have a compound growth rate of 10.7% in the first year of 2013-2018, and the output value is estimated to be 8.2 billion US dollars. Among them, sensors, optical sensors and related discrete components, the annual compound growth rate is estimated to be 20.3%. The output value in 2018 is estimated to be 1.6 billion US dollars. According to IC Insights, the output value of the medical semiconductor industry this year is estimated at 6.2 billion US dollars, an annual increase of 17%. It is estimated to reach 7.2 billion US dollars next year, and then grow 16%. The output value in 2018 is estimated to be 8.2 billion US dollars, and the output value is stable. IC Insights believes that as more medical imaging systems are digitized and health care equipment enters the computerized phase, the growth of the medical-related IC market will be boosted, and the speed is expected to be comparable to that of mobile devices. Including new types of medical systems, as well as imaging, diagnostic, diagnostic and surgical related equipment, will continue to introduce more semiconductor technology, new medical equipment will also move toward smaller devices, and prices are expected to increase due to semiconductor imports. Cheaper, low-cost medical wearables and health monitoring products provide patients and doctors with more timely monitoring of relevant health information, and will be an important growth kinetic for future medical products . In addition, with the advancement of the medical system, there will be more medical equipment in the future that must be more rapid detection and rapid recovery of small surgery, reduce the impact on the body and reduce cost pressure, in addition, the medical industry is also developing surgical robots, seeking operating room automation In order to reduce the demand for manpower, it is expected to drive the semiconductor industry. Taiwan's related IC design mainly focuses on medical related products with MCU, but most of them are peripheral devices, including Shengqun, Songhan, Xintang, etc., and are expected to benefit from the growth trend of this medical industry. Hot-dip galvanization is a form of galvanization. It is the process of coating iron and steel with zinc, which alloys with the surface of the base metal when immersing the metal in a bath of molten zinc at a temperature of around 840 °F (449 °C). When exposed to the atmosphere, the pure zinc (Zn) reacts with oxygen (O2) to form zinc oxide (ZnO), which further reacts with carbon dioxide (CO2) to form zinc carbonate (ZnCO3), a usually dull grey, fairly strong material that protects the steel underneath from further corrosion in many circumstances. Galvanized steel is widely used in applications where corrosion resistance is needed without the cost of stainless steel, and is considered superior in terms of cost and life-cycle. Galvanized Steel Pipes,Galvanised Pipe,Galvanised Steel Pipe JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.greenhousehydroponic.com