Brief description of three sterilization methods for water tank self-cleaning sterilizer

March 28, 2023

Water tank self-cleaning sterilizer sterilization method:
1. Method for producing ozone
At present , there are two main types of water tank self-cleaning sterilizers used by various manufacturers of pure water and mineral water:
One is air as a gas source, and the air is compressed, condensed, filtered, dried, etc., and then enters the high-pressure discharge tube. In the high-voltage discharge environment, some oxygen molecules in the air are excited to decompose into oxygen atoms, oxygen atoms and oxygen. An atom (or an oxygen atom and an oxygen molecule) combine to form ozone. The main drawback of the law is the high noise.
The other is pure oxygen as a gas source, which is dried by silica gel and then enters the discharge tube to generate ozone gas. The ozone source generator produces ozone with high concentration, purity, no noise, and can overcome the use of the air source generator for a period of time. It is easy to make the treatment water have the disadvantage of producing odor. The disadvantage is that the oxygen cylinder needs to be replaced frequently.
2. Mixing mode of ozone and pure water
There are two ways to mix ozone with pure water:
One is a tower mixing in which ozone is mixed with water in an ozone-water mixing tower to form a filling water. The column can be filled with some fillers to increase its mass transfer coefficient and increase the concentration of ozone.
Another mode of mixing is that the ozone produced first enters the ejector (venturi) and is then thoroughly mixed with water under turbulent flow in a fixed spiral mixer. The method has the advantages of high mass transfer coefficient, high ozone concentration in water, small occupied area, and the like, and is suitable for equipment using oxygen as a gas source.
3. Control of mixing ozone and water to before filling
The half-life of ozone mixed with pure water in water depends mainly on the water temperature. If the water temperature is high, the half-life is short; if the water temperature is low, the half-life is long. Generally between 15-40min. This has high requirements for the production process of drinking pure water enterprises. The manufacturing process and production control of some production enterprises are not reasonable, which is the reason for the low concentration of ozone in the filling.

The above is the three methods that Xi'an Connor Environmental Protection Technology Co., Ltd. tells you about the sterilization of the water tank self-cleaning sterilizer . I hope to help you. For more information about environmental protection equipment, please let us know!

Lipo Battery

1. Smart battery indicator
This product is designed with four high-brightness LED indicators. When discharging or charging, it can automatically recognize the status and indicate the power. When the battery is in the off state, short press the button. The LED indicates that the power is about 2S and then turns off.

2. Battery life
When the number of uses reaches 150 times, the power indicator LED lights turn red to indicate power, indicating that the battery life has been reached, and the user can use it accordingly.

3 smart alarm charging
During the charging process, the battery detects the status in real time and warns of charging overload, overcurrent and overheating.

4. Intelligent low voltage alarm
When the battery is in the state of discharge, when the voltage is detected to be low (only 3.7V), it comes with a buzzer alarm to remind, stop discharging,. And the alarm goes off.

5. Smart storage function
When the battery is at a high level for a long time and is not in use, it will automatically start the intelligent storage function and discharge to the storage voltage to ensure battery storage safety.

6. Automatic sleep function
When the battery is on and not in use, it will automatically turn off after 3 minutes to save battery power.

7.Software update function
This product has a software update function, you can connect the computer through the USB port or update the software through the mobile app to update the battery software.

8. Data communication function
This product is designed with two communication methods at the same time: USB serial communication and WiFi communication; Both methods can be used to get real-time battery information such as current voltage, current, battery usage, etc.; Flight Control can also establish a connection to this to communicate.

9. Battery record function
This product is designed with a unique logging function that can store and store data for the entire life of the battery. Battery log information includes cell voltage, current, battery temperature, number of cycles, number of abnormal states, etc. User can connect battery to view via mobile phone APP.

Lipo Battery,Lipo Battery Charger,Lithium Polymer Batteries,Lipo Battery Storage,22000 mah 12s,12s battery,drone battery,drone lithium battery

Dongying Youjia Industry & Trade Co. Ltd. , https://www.uav55.com