Fishing ponds, clear and exquisite mining machinery
In winter, it is a good season for dredging of fish ponds and fish cultivation in Jiantang. The following describes the selection methods for dredging machinery for fishing ponds. 1. For dredging of fish ponds, hydraulic digging pond units should be used. The unit can suck up sludge and carry out operations such as long-distance transport, composting, and land reclamation. 2. Excavation is to enlarge the water-bearing fishing ponds, and hydraulic digging pond units should be selected. The unit can simultaneously complete the five processes of digging, loading, transporting, unloading and arranging. 3, newly excavated waterless fishing ponds, should use bulldozers. Precautions: When using the digging pond dredging machinery, according to different soil quality, choose the appropriate flushing pressure and impact method. If the sludge or mud at the bottom of the tank is removed, the flushing pressure is generally 3.5 kg per square centimeter; if it is to remove the original loess, it needs 5 kg per square centimeter; if it is to remove the compacted clay or the original fine sand, it needs 7.5 kg per square centimeter. The distance from the water gun to the impact surface is generally not more than 4 meters. The suction concentration of the mud pump is 60-80%, and the diameter of mud blocks and impurities should be less than 50mm. During operations, the crew should be regularly cleaned, overhauled, refueled, and replaced with damaged parts. Conduct safety inspections on electromechanical equipment. Pump filter mouth should be added filter cover, motor should be covered with shell protection. Organic Isomalto-Oligosaccharide 500 (tapioca) Powder Organic Tapioca IMO,Low GI IMO,Organic IMO Isomaltooligosaccharide Shandong Bailong Chuangyuan Bio-tech Co.,Ltd. Qingdao Branch , https://www.sdblcycn.com