How to better maintain and maintain the ice machine
High-Quality Fresh Ginger,New Fresh Ginger,Fresh Organic Ginger,Ginger To Europe Laiwu Manhing Vegetables Fruits Corporation , https://www.manhingfood.com
Because the technical content of the ice machine is higher than that of other refrigeration equipment, the use environment of the ice machine is good and bad, and regular maintenance is extremely important for the service life of the ice machine and the ice making effect. The following is the ice machine. Daily maintenance methods. 1. The ice machine should be installed away from the heat source, without direct sunlight, and the ventilation is good. The ambient temperature should not exceed 35 degrees Celsius to prevent the condenser from dissipating heat and affecting the ice making effect. The floor where the ice machine is installed should be solid and flat, and the ice machine must be level, otherwise it will cause no ice and noise during operation. 2. The gap between the back and left and right sides of the ice making machine should be no less than 30cm, and the top clearance should be no less than 60cm. 3. The ice machine should use independent power supply, special line power supply with fuse and leakage protection switch, and reliable grounding. 4. The water of the ice machine should meet the national drinking water standard, and a water filtration device should be installed to filter the impurities in the water to avoid clogging the water pipe and polluting the water tank and the ice mold. And affect the performance of ice making. 5. Carefully handle the ice machine to prevent severe vibration. The handling inclination should not be less than 45 degrees. After long-distance transportation, the ice machine should be placed for 2-6 hours before the mechanism ice can be opened. 6. When cleaning the ice machine, turn off the power supply. Do not use the water pipe to directly align with the body. Use a neutral detergent to scrub. Do not use acidic or alkaline solvents to clean. 7. The ice machine must unscrew the inlet hose head for two months to clean the inlet valve screen to prevent the sand mud impurities from clogging the water inlet, which causes the water intake to become smaller, resulting in no ice. 8. The surface of the condenser must be cleaned every two months. If the condensation is poor, the compressor components will be damaged. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the condensed surface oil dust. Do not use a sharp metal tool to clean it to avoid damaging the condenser. 9. The water pipes, sinks, storage refrigerators and protective film of the ice machine should be cleaned every two months. 10. When the ice machine is not in use, it should be cleaned, and the ice mold and the moisture in the box should be dried with a hair dryer, placed in a place free of corrosive gas and ventilated and dry, to avoid open storage. For more information about the ice machine, you are welcome to visit our website to learn more! Beijing Changliu Scientific Instrument Co., Ltd. specializes in R&D, production, sales and agency of scientific instruments. Main products: Snowflake ice machine, ice machine, cooling water circulation, low temperature cooling cycle, etc.